Wash basin mounting module, height 124 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars. Prepared for connection to SCHELL concealed masterboxes (wash basin).

Manual actuation with automatic closing. Easy flow time adjustment.

Manual actuation with automatic closing. Easy flow time adjustment.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Cross bar with drain elbow and construction plug, height-adjustable
• Cross bar for masterbox, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,00 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II
• Flow regulator
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,00 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing wall outlet tap
• SC self-closing button
• Self-closing cartridge SC II
• Flow regulator
• Rosette Ø 60 mm

Delivery data

• Weight: 0,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,53 kg/Piece
• Packing unit: 1

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 124 cm
• Waste water connection: Ø 50 mm
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29071/IO
• Noise class: I
• Flow class: O

Technical data

• Running time: 6 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 0.8 - 5.0 bar
• Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 28340/IO, DIN-DVGW, dr, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua
• Noise class: I
• Flow class: O