With stainless steel braided sleeving and a rotatable connection line.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks.

Low-noise concealed flush valve. For combination with all SCHELL WC controls/operating panels. Conform to DIN EN 12541. Internal isolating valve.

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,42 kg/Piece
• Packing unit: 1

Scope of delivery

• Masterbox
• Roughing-in housing
• Concealed flush valve COMPACT II, with isolating valve and flush plug
• Pipe interrupter (DIN EN 12541)
• Flush-mounted cap
• Height-adjustable flush pipe with construction plug

Delivery data

• Weight: 1,63 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x G 3/8 IG
• Certificates: P-IX 9524-I
• Noise class: I

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Max. Resting pressure: 8 bar
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Plastic; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Connection: DN 20 G 3/4 AG (right)
• Outlet: Flush pipe Ø 45 mm
• Certificates: PA-IX 18844/I, DIN-DVGW, Belgaqua
• Noise class: I, at 100% flow