WC module, height 115 cm with concealed cistern 12 cm. For barrier-free WCs. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

For drawing off drinking water samples (DIN ISO 19458). Actuation of angle valve under cover cap.

For wall-mounted WC and bidet. Compensation backfill between ceramic unit and tiled wall. Sound-absorbing, conform to DIN 4109. UV-resistant.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable special feet 0-15 cm, self-supporting
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PVC drain elbow Ø 90 / 100 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet
• MONTUS wall bracket set (150-210 mm)

Delivery data

• Weight: 17,44 kg/Piece
• Packing unit: 1

Scope of delivery

• Sampling angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• Cranked sampling pipe with union nut
• Cap with chain

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 20

Scope of delivery

• WC sound-insulation mat
• Protection hoses, nuts and cover caps

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,93 kg/Piece
• Packing unit: 1

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 42 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), G 3/4 AG
• Certificates: DVGW, ACS

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O