Angle valve with regulating function COMFORT with filter
Electronic wash basin tap XERIS E-T
Electronic wash basin tap XERIS E
Concealed wash basin tap LINUS W-E-M
HD-M mid - high-pressure mixed water, ThermoProtect thermostat
HD-K large - high-pressure cold water/pre-mixed water
Mixed water
Article number
With COMFORT handle. To protect high-quality fittings, e.g. electronically controlled fittings. According to DIN 3227.
Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.
Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.
For WBW-E-M concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

  • Angle valve
    • COMFORT handle
    • Filter (mesh gauge: 250 µm)
    • Long push rod
  • High-tensile brass cone compression connection with length compensation
  • Push rosette Ø 54 mm

Delivery data

  • Weight: 0,20 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
    • Infrared sensor electronics, programmable
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,44 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • Standpipe extension
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
  • 6 V battery compartment, protection class IP65
  • 4x AA alkaline battery 1.5 V
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,57 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Front panel with infrared sensor window
    • Mixed water operating button with push sleeve
  • Installation frame with infrared sensor electronics, programmable
  • Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
  • Wall outlet with flow regulator (theft-safe)
  • Fastening material

Delivery data

  • Weight: 2,20 kg/Piece
  • Packing unit: 1

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 10 G 3/8 AG
  • Outlet: DN 10 G 3/8 AG
  • Certificates: P-IX 198/IA, ACS
  • Noise class: I
  • Flow class: A

Technical data

  • Setting options via SWS SSC
    • Programming via short range reflex (off/on)
    • Sensor range (short/medium/long)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Thermal disinfection: possible, after releasing the temperature lock
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: PA-IX 29073/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Stainless steel
  • Surface: Outlet Chrome; Actuation Chrome; Front panel Brushed stainless steel
  • Outlet: L 230 mm
  • Dimensions front plate: w 188 mm x h 180 mm x d 12 mm
Filter categories
Connection
3/8"
3/8"
3/8"
-
Outlet
3/8",
Compression connection
-
-
-
Finish
Chrome
Chrome
Chrome
Stainless steel
Noises
Noise class 1
Noise class 1
Noise class 1
-
Equipment
Filter
Backflow preventer,
Filter,
Flow restrictor
Backflow preventer,
Filter,
Flow restrictor
-
System solutions
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
Function
-
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Temperature
-
Thermostat (incl. scald protection),
Mixed water
Cold water/pre-m. water
Mixed water
Watersaving
-
Start/stop function
Start/stop function
-
Hygiene
-
Stagnation flush,
Therm. disinfection
Stagnation flush
Stagnation flush,
Therm. disinfection
Energy supply
-
via SWS or central power pack
Battery mode
Mains mode
Pressure
-
High pressure / standard pressure
High pressure / standard pressure
High pressure / standard pressure
Safety class
-
EB
EB
-
4