For integrating the SWS water management system with a central building control/automation system. Translates the SWS protocol into the MODBUS IP/RTU bus protocol. Data points can be chosen as required – subsequent upgrade possible to max. 2,500 data points without replacing hardware. Configuration accessible only via individual password.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For SCHELL exposed shower fittings with shower connection at bottom.

Scope of delivery

• Gateway with web interface
• ARM9 processor
• LED status indicators
• Rugged metal housing for top hat rail installation
• RS-485/COM1 interfaces
• RJ45 LAN interface, 10/100 Mbps
• Preinstalled German and English language packs

Delivery data

• Weight: 0,39 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Hand shower with anti-limescale knobs, 3-way adjustable
• Shower hose with anti-twist protection
• Shower bar (stainless steel)
• Fastening material

Delivery data

• Weight: 1,36 kg/Piece
• Packing unit: 1

Technical data

• Data points: 200
• Dimensions: w 31 mm x h 100 mm x d 70 mm
• Input: 12 - 24 VAC

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Jet types: Soft, Vital, Power
• Surface: Chrome, Polished stainless steel
• length shower hose: 1500 mm
• length shower bar: 680 mm