For installing on appliance connection fittings with backflow preventer, without anti-vacuum device.

To connect the 12 V mains adapter with the solenoid valve for thermal disinfection.

Cover for covering mixed water shaft, with fixed pre-configuration of mixing ratio for PURIS E/VENUS E wash basin taps with temperature control.

With 2 high-tensile brass cone compression connections.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For VITUS exposed shower fittings with shower connection at top.

without seal.

Connection cover for covering cold/hot water supply laid as exposed supply lines.

Head part with grip handle.

With COMFORT handle. According to DIN 3227.

High-tensile brass cone compression connection with length compensation.

For SCHELL COMPACT II ND concealed WC flush valve. Low pressure from 0.8 bar.

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,28 kg/Piece
• Packing unit: 1

Scope of delivery

• Cover sleeve

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 25

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,81 kg/Piece
• Packing unit: 1

Scope of delivery

• Rubber ring
• Brass flat washer

Delivery data

• Weight: 0,002 kg/Piece
• Packing unit: 50

Scope of delivery

• Double nipple with rosette
• 2 compression connections
• Pipe elbow Ø 15 mm, can be cut to length

Delivery data

• Weight: 0,51 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Connection cover
• Fastening material

Delivery data

• Packing unit: 1

Scope of delivery

• Draw-off valve
• Grip handle
• Hose screw connection

Delivery data

• Weight: 0,25 kg/Piece
• Packing unit: 20

Scope of delivery

• Angle valve
• COMFORT handle
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 100

Scope of delivery

• Union nut
• Length compensation piece (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 50

Scope of delivery

• Designer operating panel
• Operating button
• Low-pressure self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame

Delivery data

• Weight: 0,61 kg/Piece
• Packing unit: 1

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 70 °C
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Outlet: DN 20 G 3/4 IG
• Safety device, conforms to EN 1717: HB
• Certificates: DIN-DVGW

Technical data

• length: 10 m

Technical data

• Surface: Chrome

Technical data

• Material: Brass, conform to German drinking water regulations
• Connection: Ø 10 mm (DN 10 G 3/8 AG)
• Outlet: Ø 8 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Connection: Ø 16, for union nut DN 20 G 3/4 IG

Technical data

• Dimensions: h 500 mm x d 100 mm
• Connection: G 1/2 IG
• Outlet: G 1/2 AG

Technical data

• Material: Brass
• Surface: Chrome
• Connection: Ø 8, DN 15 G 1/2 IG

Technical data

• Measurement length: 451 - 950 mm
• Material: Stainless steel 1.4404
• Surface: Brushed stainless steel

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Certificates: ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 8, DN 10 G 3/8 IG

Technical data

• Single flush: 4.5 - 6.0 l
• Material: Actuation Plastic; Front panel Plastic
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm