With stainless steel braided sleeving.

With stainless steel braided sleeving and a rotatable connection line.

Filter angle valve for protecting high-quality fittings (e.g. electronic taps). Integrated appliance valve for connecting household appliances.

Not suitable for drinking water. Actuation with cap.

Battery operation. Configurable via SCHELL Single Control SSC.

Extension when installation of the concealed WBD-E-M masterbox is too deep.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Vandal-resistant shower head, with soft stream and anti-limescale burls. Exposed shower head, connection at bottom.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Manual actuation with automatic closing. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above. Solenoid valve for thermal disinfection with SWS integrated.

One end with Ø 14 mm flange for G 3/8 union nut, other end with Ø 18 mm flange for G 1/2 union nut.

With stainless steel braided sleeving.

Ball valve with maintenance-free, electric actuator for period-controlled, automatic or manual shut-off of the drinking water installation. Selectable via SWS Server and integrated SWS BE-F wireless bus extender. Gear motor disengage with lockable push button.

Ball valve with maintenance-free, electric actuator for period-controlled, automatic or manual shut-off of the drinking water installation. Selectable via SWS Server and integrated SWS BE-F wired bus extender. Gear motor disengage with lockable push button.

With COMFORT handle. Short version. According to DIN 3227.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 20

Scope of delivery

• Combination angle valve
• COMFORT handle
• Filter (mesh gauge: 250 µm)
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,43 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,009 kg/Piece
• Packing unit: 1

Scope of delivery

• Ball valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 50

Scope of delivery

• Exposed urinal flush valve
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Isolating valve
• 4x AAA alkaline battery 1.5 V
• Urinal internal connector
• Push rosette Ø 80 mm
• Flush pipe Ø 18 mm x 193 mm

Delivery data

• Weight: 1,24 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,32 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• High-tensile brass cone compression connection

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 25

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head
• Compression connection
• Fastening material for wall installation

Delivery data

• Weight: 1,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Self-closing cartridge SC II
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Hand shower
• Flow restrictor

Delivery data

• Weight: 0,24 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,19 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 20

Scope of delivery

• Leak protection fitting
• Electric drive
• Control unit with integrated SWS BE-F wireless bus extender
• Ball valve
• Connection cable 1000 mm, 3x 0.75 mm²

Delivery data

• Weight: 2,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Leak protection fitting
• Electric drive
• Control unit with integrated SWS BE-K wired bus extender
• Ball valve
• Connection cable 1000 mm, 3x 0.75 mm²

Delivery data

• Weight: 2,25 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve (short version)
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• High-tensile brass cone compression connection with length compensation
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 100

Scope of delivery

• Front panel with infrared sensor window
• Mixed water operating button with push sleeve
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• Fastening material

Delivery data

• Weight: 1,83 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: PA-IX 851/IA, ACS, SVGW
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Flow: max. 1,5 gpm ≈ 5,7 l/min

Technical data

• Max. Operating pressure: 16 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Brass

Technical data

• Setting options via SSC
• Sensor range (short/medium/long)
• Flush time (1-15 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Pre-flush (off/1 s, lockout time 5-60 min after last flush)
• Automatic stadium program (off/1 s per user, main flush 20-60s after last use)
• Odour trap flush (off/1-240 h after last flush)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Pre-flush (off/1 s)
• Automatic stadium program (off/1 s per user)
• Rap flush (off/on)
• Flush time (1-15 s)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Flush flow: 0.3 l/s, conform to DIN EN 12541
• Material: Parts in contact with water Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Internal connector Ø 43 mm (flush pipe Ø 18 mm)
• Certificates: PA-IX 8952/II
• Noise class: II, at 100% flow

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 50 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 IG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 9 l/min pressure independent
• Surface: Chrome
• Tilt angle: 23 °
• Connection: Ø 15 (DN 15 G 1/2 AG)

Technical data

• Running time: 5 - 30 s (20 s )
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Jet types: Soft
• Flow: max. 9.5 l/min pressure independent
• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Surface: Chrome
• length: 1000 mm

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Material: Parts in contact with water Brass, conform to German drinking water regulations
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 G 1/2 IG
• Input: 230 VAC, 50 - 60 Hz
• Protection class: IP54

Technical data

• Material: Parts in contact with water Brass, conform to German drinking water regulations
• Connection: DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 IG
• Input: 230 VAC, 50 - 60 Hz
• Protection class: IP54

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, ACS, KIWA
• Noise class: I
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Front panel Brushed stainless steel
• Outlet: L 170 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm