With stainless steel braided sleeving and a rotatable connection line.

With stainless steel braided sleeving and a rotatable connection line.

With COMFORT handle and grease chamber head part.

Both as construction plug and for high-precision depth compensation for all fitting connections. Annealed unstressed (540 °C/2 h).

WC module, height 115 cm with concealed cistern 12 cm. For barrier-free WCs. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

Infrared sensor-controlled. Additional single-lever operation. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

Design: sieger design. According to DIN 3227.

According to DIN 3227.

For drawing off drinking water samples (DIN ISO 19458). Actuation of angle valve under cover cap.

With COMFORT handle. According to DIN 3227.

Manual actuation with automatic closing. Easy flow time adjustment.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. With extended outlet 140 mm.

All-metal design with brass push button. Conform to DIN EN 12541. Single flush.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Infrared sensor-controlled. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

All-metal design with brass push button. Conform to DIN EN 12541.

Aerator key for SCHELL aerators for XERIS and PURIS SC from 05/2024.

Manual open/cold/hot actuation with clinic arm lever.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

With COMFORT handle. According to DIN 3227.

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Scope of delivery

• Sink valve
• COMFORT handle
• Backflow preventer
• Anti-vacuum device
• Hose screw connection
• High-tensile brass cone compression connection
• Seals
• Screw-type rosette

Delivery data

• Weight: 0,67 kg/Piece
• Packing unit: 1

Scope of delivery

• Installation element
• ASAG easy (Self-sealing connection thread)
• Sealing plug

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 25

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable special feet 0-15 cm, self-supporting
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PVC drain elbow Ø 90 / 100 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet
• MONTUS wall bracket set (150-210 mm)

Delivery data

• Weight: 17,44 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter

Delivery data

• Weight: 3,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Polished brass body
• Brass cover for actuation and outlet
• ASAG easy (Self-sealing connection thread)
• Grease chamber head part
• Push rod
• High-tensile brass cone compression connection with length compensation
• Rosette Ø 60 mm

Delivery data

• Weight: 0,27 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Push rod
• Push rosette Ø 60 mm

Delivery data

• Weight: 0,18 kg/Piece
• Packing unit: 1

Scope of delivery

• Sampling angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• Cranked sampling pipe with union nut
• Cap with chain

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 20

Scope of delivery

• Angle valve (long version)
• COMFORT handle
• Long push shaft 44.5 mm
• Push rosette Ø 63 mm

Delivery data

• Weight: 0,19 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II with hot water restrictor
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,85 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,49 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed WC flush valve
• Self-closing cartridge with automatic nozzle cleaning needle
• Push rosette Ø 60 mm
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 1,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,18 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed urinal flush valve
• Self-closing cartridge with nozzle bore pre-filter
• Urinal internal connector
• Push rosette Ø 60 mm
• Flush pipe Ø 18 mm x 193 mm

Delivery data

• Weight: 0,70 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,005 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/cold/hot exposed wash basin tap
• Ergonomic clinic arm lever 153 mm
• Open /cold/warm ceramic cartridge with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with Care flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,06 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,59 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• COMFORT handle
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 10

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Surface: Connection Chrome
• length: 150 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• shaft diameter: 28 mm
• Adjustment range: 1 - 50 mm
• Connection: Ø 10 mm (DN 15 G 1/2 AG)
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Brass
• Connection: DN 15 G 1/2 AG with ASAG easy

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 42 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 229/IA, ACS, NF
• Noise class: I
• Flow class: A

Technical data

• Material: Brass, conform to German drinking water regulations; Actuation Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG
• Certificates: P-IX 212/IA, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), G 3/4 AG
• Certificates: DVGW, ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG
• Certificates: P-IX 212/IA, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29071/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua
• Noise class: I

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Single flush: 4.5 - 9.0 l
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm
• Certificates: PA-IX 9901/II, DIN-DVGW, Belgaqua
• Noise class: II, at 100% flow

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38235/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow pressure: 0.8 - 5.0 bar
• Max. Resting pressure: 8 bar
• Flush flow: max. 0.3 l/s
• Flush volume adjustable: 1.0 - 6.0 l
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Internal connector Ø 43 mm (flush pipe Ø 18 mm)
• Certificates: PA-IX 9892/II, DIN-DVGW
• Noise class: II, at 100% flow

Technical data

• Material: Plastic

Technical data

• Flow: 7.5 - 9.0 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38239/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, ACS, KIWA
• Noise class: I
• Flow class: A