For a retrofit connection of an appliance to a pre-installed angle valve. With COMFORT handle and grease chamber head part. HD safety combination (EN 1717).

With COMFORT handle and grease chamber head part.

With stainless steel braided sleeving and a rotatable connection line.

Pressure-independent flow restrictor.

Not suitable for drinking water.

With socket for plug element at 30° pitch. Outer diameter suitable for accommodating the push rosette. Low stress corrosion cracking due to galvanised surface and stress-free plug connection.

With socket for plug element at 30° pitch. Outer diameter suitable for accommodating the push rosette. Low stress corrosion cracking due to galvanised surface and stress-free plug connection.

With COMFORT handle. Adjustable screw connection for high suspended cisterns. Short version.

Made from a strong extruded aluminium profile with a high-quality, anodised finish. Manual actuation with automatic closing. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Infrared sensor-controlled. Battery operation.

Contact-free infrared sensor flushing facility with button for manual actuation. For SCHELL COMPACT II concealed WC flush valve. Automatic triggering when leaving the WC (room monitoring). Dual flush. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Power supply via SWS, mains adapter or battery compartment.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

One end with Ø 14 mm flange for G 3/8 union nut, other end with Ø 18 mm flange for G 1/2 union nut.

Manual actuation with automatic closing. Easy flow time adjustment.

Wash basin mounting module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

With COMFORT handle. According to DIN 3227.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

With COMFORT handle. Short version. According to DIN 3227.

Scope of delivery

• Appliance valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• Hose screw connection
• High-tensile brass cone compression connection with length compensation

Delivery data

• Weight: 0,51 kg/Piece
• Packing unit: 1

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,32 kg/Piece
• Packing unit: 5

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Scope of delivery

• Sink set
• Union nut G 3/4 IG
• Hose screw connection
• Seals
• Screw-type rosette Ø 43 mm
• Copper pipe Ø 12 mm x 500 mm

Delivery data

• Weight: 0,45 kg/Piece
• Packing unit: 1

Scope of delivery

• Hand shower
• Connection hose, plastic, G 1/2 IG x 1200 mm
• Wall bracket
• Fastening material

Delivery data

• Weight: 0,42 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,03 kg/Piece
• Packing unit: 1

Scope of delivery

• Plug valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 100

Scope of delivery

• QUICK adapter
• Protective cap with vent pin
• Water stop
• ASAG easy (Self-sealing connection thread)

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Scope of delivery

• QUICK adapter
• Protective cap with vent pin
• Water stop
• ASAG easy (Self-sealing connection thread)

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 20

Scope of delivery

• Angle valve (short version)
• COMFORT handle
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 5

Scope of delivery

• Self-closing exposed shower panel
• SC self-closing button
• Self-closing cartridge SC II
• LOW AEROSOL shower head, 20° ±6°, vandal-resistant
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 15,00 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• Flexible connection hose, G 3/8 IG x 450 mm, with pre-filter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Fastening material for wash basin installation

Delivery data

• Weight: 1,69 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window and button for manual actuation
• Mechanical bypass valve for manual actuation in the event of power failure
• 6 V solenoid valve with pre-filter
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame with infrared sensor electronics, programmable

Delivery data

• Weight: 1,31 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Scope of delivery

• Self-closing exposed wash basin tap
• SC-M self-closing button
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Self-closing cartridge SC II with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,59 kg/Piece
• Packing unit: 1

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Cross bar with noise-insulated angle valve connections 80/160/320 mm, siphon elbow, siphon rubber and construction plug, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 10,74 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Mixed water operating button with push sleeve
• Installation frame with infrared sensor electronics, programmable
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,24 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• COMFORT handle
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 100

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,87 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve (short version)
• COMFORT handle
• High-tensile brass cone compression connection with length compensation
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 5

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 IG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: DVGW, ACS, Belgaqua

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 2850/IA, ACS
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Surface: Connection Chrome
• length: 150 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Material: Brass, conform to German drinking water regulations, Copper
• Surface: Chrome
• shaft diameter: 22 mm
• Adjustment range: 1 - 70 mm
• Connection: Union nut G 3/4 IG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)

Technical data

• Material: Plastic
• Surface: Chrome
• Connection: G 1/2 IG

Technical data

• Flow: max. 4 l/min pressure independent
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 IG
• Outlet: DN 10 G 3/8 AG

Technical data

• Max. Operating pressure: 12.5 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• shaft length: 35 mm
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: QUICK plug-in technology DN 15

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• shaft length: 70 mm
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: QUICK plug-in technology DN 15

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Union nut DN 10 G 3/8 IG
• Certificates: P-IX 212/IA, ACS, NF
• Noise class: I
• Flow class: A

Technical data

• Running time: 5 - 30 s (20 s )
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Shower head Brass, conform to German drinking water regulations; Housing Aluminium; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Shower head Chrome; Housing Brush anodised aluminium
• Dimensions: w 226 mm x h 1200 mm x d 115 mm
• Connection: DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/every 24 hours after last flush)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Material: Front panel Stainless steel
• Surface: Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Surface: Chrome
• length: 400 mm

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38237/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 50 mm
• Water connection: 2x DN 15 G 1/2 AG (bottom)
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)
• Water outlet: 2x DN 15 G 1/2 IG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Brass
• Surface: Outlet Chrome; Actuation Chrome; Front panel Chrome
• Outlet: L 230 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, KIWA, NF
• Noise class: I
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 19116/IZ
• Noise class: I
• Flow class: Z

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, NF, WRAS applied
• Noise class: I
• Flow class: A